Roll cutter - List of Manufacturers, Suppliers, Companies and Products | IPROS

Roll cutter Product List

1～6 item / All 6 items

Displayed results
Semi-Automatic Roll Cutter "CM-330S"

Semi-Automatic Roll Cutter "CM-330S"

Easy operation with one touch! Excellent economy, efficiency, and heat resistance to accommodate various materials!

The "CM-330S" is a semi-automatic roll cutter (double-edged grinding machine) that uses borazon grinding stones, excelling in economic efficiency, effectiveness, and heat resistance. The rotation of the cutter and chuck is infinitely variable through inverter control. The shaft is custom-made to fit paper tubes, ensuring there is no rotational wobble of the raw material. In addition to adjusting the grinding angle and position, the operation of the shaft indicator rod and the exchange of the chuck's outer claws can be done with a single touch. The operation switches are centralized at the operator's fingertips, and the cutting dimensions can be easily input via a touch panel. Moreover, it is equipped with safety features that automatically stop the machine if there is an abnormal load on the cutter or chuck. 【Features】 ■ Excellent economic efficiency (long-term durability) ■ Excellent effectiveness (reduced grinding time, resistant to clogging) ■ Excellent heat resistance (capable of long grinding sessions) ■ Various adjustments and operations can be performed with a single touch ■ Double and triple safety measures ★ We are also accepting online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the catalog or feel free to inquire.

  • Other fittings
  • Roll cutter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fully Automatic Roll Cutter "CC-300A"

Fully Automatic Roll Cutter "CC-300A"

Design focused on safety, productivity, and operability! The cutting surface is beautiful with a speed cut!

The "CC-300A" is a device that cuts with a stroke even when the diameter of the raw material changes, enabling a reduction in cycle time and preventing accidents due to forgotten adjustments. The cutting speed of the chip saw automatically shifts through three stages. It gradually speeds up from a slow start and then slows down again during paper tube cutting, resulting in a beautifully finished cut surface. Even if the diameter of the round blade changes due to grinding, the forward stop position is automatically adjusted, ensuring a clean cut to the paper tube. Additionally, the grinding device uses borazon grinding stones, making it an economical, efficient, and heat-resistant grinding machine (double-edged grinding machine). 【Features】 ■ Automatically detects the end of the raw material and moves to the starting position for operation. ■ Easy operation for adjusting grinding angle and position. ■ Dimension and quantity settings can be done with a one-touch operation on the LCD panel. ■ Operation switches are consolidated at the operator's hand. ■ Double and triple safety measures. ★ We also accept online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the catalog or feel free to inquire.

  • Other fittings
  • Roll cutter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Can't ask now! What is the difference between a roll cutter and a slitter? *Materials available.

Can't ask now! What is the difference between a roll cutter and a slitter? *Materials available.

I will explain the differences between a roll cutter and a slitter in an easy-to-understand manner.

This document introduces the differences between roll cutters and slitters. A roll cutter is a machine that processes materials into circular slices. A slitter is a machine that draws out roll-shaped materials and cuts them using free-spinning circular blades or fixed blades, then processes them into rolls. A list of handled products and compatible materials is also included. 【Contents】 ■ What is a roll cutter? ■ What is a slitter? ■ List of handled products ■ List of compatible materials ■ Frequently Asked Questions (Q&A) ■ Contact information ★ We will be launching a new model of automatic winding machine at the "10th High-Performance Film Exhibition" starting on December 4. Please refer to the basic information for details about the exhibition. ★ We are also accepting online meetings (via Skype) at any time, so feel free to contact us. * For more details, please refer to the PDF document or feel free to reach out to us.

  • Other fittings
  • Roll cutter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Roll Cutter "CX-310A"

Roll Cutter "CX-310A"

A roll cutter that significantly shortens cycle time and contributes to increased production volume!

The "CX-310A" is a fully automatic high-speed roll cutter (roll slitter) equipped with high-speed motors for front, back, left, and right movement. It cuts with a stroke even when the diameter of the raw material changes, reducing cycle time and preventing accidents caused by forgetting adjustments. With a three-stage automatic conversion of the cutting speed of the chip saw (cutter), it starts cutting slowly and gradually speeds up. When cutting paper tubes, it slows down again, and after cutting, it retracts at high speed. Additionally, it automatically detects the width of the raw material end, and dimension and quantity settings can also be done with a single touch, which is one of its features. 【Features】 ■ High-speed motors for front, back, left, and right movement ■ Automatic detection of raw material diameter ■ Three-stage automatic conversion of cutting speed ■ Automatic chuck included ■ Automatic lifting and lowering of the shaft holder ★ We are also accepting online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the catalog or feel free to inquire.

  • Other fittings
  • Roll cutter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fully Automatic Roll Cutter "CA-320A"

Fully Automatic Roll Cutter "CA-320A"

Compact design and switchable to semi-automatic operation! Easy one-touch operation roll cutter!

The "CA-320A" is a compactly designed roll cutter that takes up less space compared to conventional fully automatic models. It can also switch to semi-automatic operation, allowing for greater maneuverability. The cutter (chip saw) and chuck rotation are controlled by an inverter, enabling stepless speed variation. Additionally, it can be used as a double-edged grinding machine. Adjustments for grinding angle and position, as well as instructions for cut dimensions and quantities, can be done with a single touch, making it easy for anyone to operate. 【Features】 ■ Compact design ■ Switchable to semi-automatic operation ■ Reduced cut cycle time ■ Grinding device uses borazon grinding wheels (long-lasting) ■ Adjustments and settings can be done with a single touch, making it easy for anyone to operate ★ We also accept online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the catalog or feel free to inquire.

  • Other fittings
  • Roll cutter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fully Automatic Large Diameter Roll Cutter "CC Series"

Fully Automatic Large Diameter Roll Cutter "CC Series"

Eliminate unnecessary movements and shorten cutting time! We achieve beautifully finished cut surfaces at high speed.

The "CC Series" is a cutter (double-edged grinding machine) for cutting large diameter rolls. It eliminates dimensional errors caused by blade wobble, resulting in a straight finish without welding on the cut surface. Even if the diameter of the raw material changes, the cutter's stroke length is automatically adjusted, eliminating unnecessary movements and significantly reducing cutting time. The grinding device is installed, allowing for sharpening without removing the circular blade. The cutting surface is always beautifully finished. The rotation of the chip saw (cutter) can be selected as drive, free, or fixed, allowing for optimal cutting conditions. 【Features】 ■ The forward stop position is automatically adjusted even if the diameter of the circular blade changes due to grinding, etc. ■ Cutting dimensions and the number of cuts can be set with a single touch on the color LCD touch panel. ■ When not in operation, the circular blade is stored within a safety cover. ■ The shaft support rod is automatically raised and lowered. ■ Double and triple safety measures. ★ We also accept online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the catalog or feel free to inquire.

  • Other fittings
  • Roll cutter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Roll cutter

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.